Counting matching models…
Paddle holder. Simple replacement part for a rice cooker. Onshape: https://cad.onshape.com/documents/990c39e3b656cc9a1405262e/w/d6653f90a4c1f385688cb9b5/e/d2a46e1281792bf82275432e Filament: ABS Filament: https://amzn.to/4gpUqB6 If you…
The filament used must be able to withstand more than 100°C ! You also need 3 pieces of 6.0mm x 3.0 mm magnets (I have used "Wukong 6 x 3 mm Neodym Magnets"), which are then pressed into the holder.
Intro This measuring cup was designed as a sturdier and better alternative to the standard rice cup that comes with most rice cookers. Cups follow the Japanese Gō standard (1合 = 180 ml), which is different from the U.S. cup (236.6 ml or 8…
Our "Reishunger" rice cooker has a poorly designed drainage for condensed water. The water is supposed to end up in a small container, but it just runs down on the side of the cooker. These reducer pieces make it actually work by creating…
This is a replacement knob for stove or cooker tops. This particular one was designed for a westinghouse gas stove top but may be compatible with others. Ensure you print it with support and I suggest a reasonable amount of infill (eg…
Made a replacement Spatula holder to fit larger diameter handle spatulas. Hooks into the existing slot on the Zojirushi Rice Cookers. Made specifically for the NP-NVC10 model, but I'm sure it is compatible with other models.
This is the handle for a rick cooker. The rice cooker is a small Tatung rice cooker. Printed using 80% infill and 6 walls PLA. I have the CAD file in OnShape as well - let me know if you need that.
Replacement - knob for Amica cooker. I wanted the shape to be as close to the original as possible, or at least not visually very different. It will also work in other cookers with a 6 mm pin. If you want it to be smooth - ABS suggests -…
iCooker - Smart Controller for Rice Cookers - Enclosure printed with PETG DISCLAIMER: I can't be liable for any damages. The model is available for free download and use. If you still want to invite me for a coffee for my effort, troubles…
This model is a steam spout for the Russell Hobbs 27040-56 Rice Cooker , to redirect the flow of steam from the machine to the side, for better extraction. This part must be printed in PETG for temperature resistance. After printing and…
Printed in PLA, the underside is hollow to seat better on the cooker so support may be needed.
There are three knob designs to choose from. The smaller knob is low profile and shows all the heat options. The medium knob replicates the design of the smaller knob but increases the size for ergonomics. The large knob is easier to grip…
Replacement handle for a plastic rice cooker. Turned out slightly undersized but it still worked well enough to keep our rice cooker alive. Category: Replacement Parts
printed with cheap PLA at .2mm, no supports should be needed. I recommend gluing nonslip pads the bottom. Have used for a couple weeks and seems to be holding up to the heat for now. UPDATE v2: Very slight warping after a few months of…
A replacement foot base for Rival crock pots / slow cookers. I recommend printing this on its side, as it will make the tabs a bit stronger and less likely to split, by changing the direction of the layer grain. Recommended infill : 25%…
Hi, this is my first 3d model made in Tinkercad. This specific dew collector was made for the following rice cooker. Precision Meets Performance: Transform Your Kitchen with the Zojirushi Commercial Rice Cooker - Zojirushi Food & Culture…
A vertical stand for the Anova Precision Cooker 3.0
There were similar models online but were much bigger and couldn't really reuse the existing rubber seals so I made this. Printed in PA6-GF25 because I wanted something with a lot of temp resistance. 4 perimeters Supports underneath…
Multicooker ladle created by combining a scan of a real ladle and a 3D model based on a photo, created using Trellis Ai.
Paddle holder. Simple replacement part for a rice cooker. Onshape: https://cad.onshape.com/documents/990c39e3b656cc9a1405262e/w/d6653f90a4c1f385688cb9b5/e/d2a46e1281792bf82275432e Filament: ABS Filament: https://amzn.to/4gpUqB6 If you…
Multicooker spatula created by combining a scan of a real ladle and a 3D model based on a photo, created using Trellis Ai.
Connector for 125mm(outer diameter 129) cooker hood pipe. It fits my Amica cooker hood which I measured to have 119mm (outer) output diameter.
this is a slightly lower and louder remix of another uploaded last month
Replacement knobs for a GE slow cooker. I used a resin printer with black resin, and then filled in the indicator well with a bit of white resin and cured in place. You can also use white paint. Indicator on the knob (for pointing to each…
This is a foot to hold your Anova Sous Vide machine. It can hold it for draining or storage with or without the pump impeller cover. Print Settings Printer Brand: Other Printer: AM8 **Rafts:** No Supports: No **Resolution:** 0.3mm Infill:…
This is a combined rice and water measurement cup for use with a rice cooker Just fill the dry rice into the smaller side, the water into the bigger one to the same height, and you have the desired ratio. I prefer 1.3 water to 1 rice. The…
In V3 I added more thickness to the grip. Knob screw dimensions :- Total height: 28.2mm Screw head height: 10.6mm Screw bottom height: 17.6mm Screw outer diameter: 22.4mm Screw inner diameter: 14.4mm It must be printed with PETG or ABS or…
This is a replacement lid for the RIVAL slower cooker. Will most likely fit most brands. You should use stainless steel nuts, bolt and washer. Updated the slow cooker handle replacement. Nothing like actual field testing. Wife says the…
The button for the Buffalo Enco Rice Cooker - KW 63 was broken so this is a button that fits in the same spot and properly retains the lid to enable cooking. The button is slightly stiffer than the original, you can improve that by…
I create my custom leg on platform for our freestand kitchen stove / cooker (thread shoud be same for brands AEG, Whirlpool, Electrolux) to reach same level with our kitchen desk (original leg isn't high enough). I duplicate thread from…
I was not going to pay Anova a 4th of the price of a new cooker just for a tiny piece of plastic. Not an exact copy due to my lack of modeling experience. Can be printed without supports, it's bit steep, looks ugly, but it works. Feel…
Print in Transparent PETG. I used 0.15 Structural and 30% Infill on a Prusa Mk4. Be careful when fitting as the LED holder can put a lot of side force on the part and break it if you don't push it on exactly parallel.
The filament used must be able to withstand more than 100°C ! You also need 3 pieces of 6.0mm x 3.0 mm magnets (I have used "Wukong 6 x 3 mm Neodym Magnets"), which are then pressed into the holder.
Intro This measuring cup was designed as a sturdier and better alternative to the standard rice cup that comes with most rice cookers. Cups follow the Japanese Gō standard (1合 = 180 ml), which is different from the U.S. cup (236.6 ml or 8…
There are two Parts, the Holder and the inlay. Print the holder with tree support. The inlay doesnt need support: The inlay can snap in into the holder. Print Settings Printer: Own Build: ndl V3 Rafts: No Supports: Yes Resolution: 0.2…
Our "Reishunger" rice cooker has a poorly designed drainage for condensed water. The water is supposed to end up in a small container, but it just runs down on the side of the cooker. These reducer pieces make it actually work by creating…
Deckel für den viel zu schnell defekten 3er Eierkocher von Severin
Printed in ABS with 100% infill
Recommend print settings Material: something a little more temperature tolerant like PETG or ABS (not PLA). Supports: enabled Variable layer height? I printed this with 0.3mm layers up until the clasp, reduced to minimum layer height to…
If you get an E0 error try all the normal fixes as outlined … in the video … if that doesn't solve it open up the lid … take your time and be VERY careful not to break anything … it's a bit of a puzzle but if you take your time and don't…
A replacement knob for the Campingaz Lagoon gas cooker, which I use when camping. May also fit on other Campingaz models - I'm not sure. Included are both the original design (reverse engineered) and an FDM-friendly part which I suspect…
This is a simple Holder for a VonShef Sous Precision Cooker with Ø 55 bore and additional storage for the power cord. The print has been optimised for PLA and doesn't require any supports.
it holds a gas cooker hose so it doesnt wobble around, in my case its very handy when i move the grill by bike
2 part cooker knob, replica of the ones on my cooker. take advantage and do 2 different colours. Cooker knob needs supports, cooker knob 2 doesnt.
This is a drip tray for an electric rice cooker. It was designed as a replacement for the original tray, which broke. It fits tightly into the back. This model was printed with a layer height of 0.20 mm in PETG.
Ok, PHEW. This is a remix of a lot of things. My wife ran across a dragon head version of this (hi! Thank you! Awesome creation!) and we're... we're more Nintendo people, so after searching extensively for a model of Wario with his mouth…
I designed this direct replacement for the top adjustable dial on select Russell Hobbs pressure cookers. Print Settings: Material: ASA (UV & heat resistant — ideal for kitchen environments) Infill: 50% (for durability under frequent use)…
When I use my Presto pressure cooker, the lid lock often fails to raise when the pot is coming to pressure. This results in a significant amount of steam escaping and a lack of pressure buildup. To fix this, I often prop the lock closed…
Describtion The box is designed specifically for the cheapest version of the Decathlon gas stove, protecting it from external dirt, moisture, and damage. Always allow the stove to cool down completely before storing. Print I printed it…
WMF Mini Rice Cooker Replacement KnobWMF Mini Rice Cooker Replacement Knob. Available in two variants: M6 threaded insert. M6 Nut embedding (add a print pause in your slicer when reaching the sacrificial layer covering the nut).
Toddlermix - this is a perfect toy for a kid that would like to cook together with the parent in their favorite multicooker. Can be also a fun gift to a person who dreams of newest Thermomix :) It was a big effort to design this replica…
Chance someone needs this model is not hight, but not zero also. It is a compatible spare part for Polaris PMC 0573AD multicooker and possibly other models. The model is not exactly same to the original part, but fits well. The part must…
This is a replacement dew collector for the Tefal RK7 4-in-1 rice cooker. I have not yet printed this thing. Category: 3D Printing
Designed a 3D printable wall-mounted holder for the Anova Precision Sous Vide cooker. It's designed with very wide circumference and supports to make it extra strong as it tends to get a rough treatment in daily use. This is a V1 design.…
This knob broke after many years of service, the cooker is still good so let's save it from the dump. Printed in ASA, 0.40 mm nozzle at 0.20 mm layer heights. 6 perimeters, 15% infill. Concentric bottom layer. Optionally multicolour.…
Replacement Cooker Extractor Hood Vent Cover This was my design to replace some broken cooker extractor hood vent covers. With angled louvres and printed in ABS for best thermal resistance, they came out looking great, much better than a…
tl;dr: Download snowflakes.scad if have both OpenSCAD and MCAD dev. Download monoflakes.scad if have OpenSCAD only. === commence rambles === Thoughts: 1) existing cookie cutters are inefficient, how many times do I really want to reroll…
A simple 3D model of the rotating locking clip that holds in the filter of an ATAG Cooker Hood. Designed for the following model ranges: WS602__JM WS902__JM Printed and working great in PETG with 0.2mm layer height 15% infill with…
Modelled on the broken one in my kitchen. Not sure what exact Zanussi model, but the D-shaft measures 6mm nominal diameter with depth of approx. 17mm. It's a comfortable press-fit, and deep enough to engage the igniters when pressed.…
A simple push on know, very similar to original knob it replaces.
Lightning Lid iQ100 Wandesse 90 cm LC94WA521 Sparepart since the plastic clips from the original break from time to time. There are some tricks to use to get the transparent filament truly transparent enough to be used as a Lid for this…
Please use high temp capable filament! I used CFSYS NexABS-GF25 QIDI Q2C https://psych0h3ad.link/QIDIQ2C (Affiliate)
Very good airtight valve for extractor hood, when the extractor hood is stopped it is locked with a neodymium magnet and a washer. I have made several and they work perfectly. BODY –---- PETG – ASA – ABS NUT ------ PETG – ASA – ABS…
This is a replacement knob for stove or cooker tops. This particular one was designed for a westinghouse gas stove top but may be compatible with others. Ensure you print it with support and I suggest a reasonable amount of infill (eg…
Replacement handle for NutriChef Infrared Convection Cooker (PKAIRFR48). This fit perfectly when printed with Polymaker ASA Polylite. As such, if you print with other filaments, please take into account that ASA shrinks a bit. Honestly,…
One of the light covers on my ~20-year-old AEG cooker hood broke, and I couldn’t find an original spare part anymore. So I modelled a replacement diffuser/cover and printed it in transparent PETG . This part is meant to replace one single…
I designed this stand for the actual Lidl egg cooker so I could raise it up and improve ventilation, as I had glued a mesh screen underneath to keep insects out. I added a space for the measuring cup, allowing for neat storage. There are…
Made a replacement Spatula holder to fit larger diameter handle spatulas. Hooks into the existing slot on the Zojirushi Rice Cookers. Made specifically for the NP-NVC10 model, but I'm sure it is compatible with other models.
This is the handle for a rick cooker. The rice cooker is a small Tatung rice cooker. Printed using 80% infill and 6 walls PLA. I have the CAD file in OnShape as well - let me know if you need that.
A simple and practical rice scoop holder designed to keep your rice paddle clean, dry, and within easy reach while cooking. Instead of placing the scoop on the counter, this holder gives it a dedicated spot near your rice cooker, helping…
The wife's rice cooker handle broke, so I made this replacement for her. Works like a charm. I printed in Polymaker HT-PLA-GF but ABS is probably a great choice as well. I didn't have any green on hand so black it is. :) Recommend…
Got tired of having to put my left over rice in a different container and dirty another dish, so I made a lid. Model was printed on a Prusa Core One+, using SainSmart TPU.
This design is a cover for the Ikea exhaust pipe with a diameter of 150 mm: https://www.ikea.com/de/de/p/nyttig-tub-150-flexibles-abzugsrohr-fuer-geblaese-90250259/ Between the two parts you can add an extra filter membrane.
Replacement Condensation Tray for the Cuckoo CR-632 Rice Cooker Printing Instructions Place the model flat on its back side for printing. Use internal supports inside the container with the following settings: Support Settings Type:…
Gas stove cover for a portable camping stove. Can be used to protect the cheapest type of gas stove available in most places and to make it easier to pack away. The gas stove is usually available in camping stores. There is a unique text…
Replacement - knob for Amica cooker. I wanted the shape to be as close to the original as possible, or at least not visually very different. It will also work in other cookers with a 6 mm pin. If you want it to be smooth - ABS suggests -…
Our rice cooker handle broke, so I designed a replacement. Here is the onshape page Print Settings Rafts: Yes Supports: Yes (print at an angle to minimize them) Notes: Done in ABS/ASA to withstand the heat. Category: Kitchen & Dining
3D Printed Solar Cooker Holder – Free STL Download and Egg Cooking Test No more spilling during loading and unloading your foodtray Loading and unloading a solar cooker can sometimes be awkward, especially when the food tray needs to be…
A rice cooker spoon holder made mainly for my Panasonic rice cooker and ice cube maker. I got tired of looking for counter space for the rice cooker spoon and ice cube scoop.
Kitchen Range Hood Knob Replacement I designed this 3D model as a replacement for a broken kitchen range hood control knob. The goal was to create a simple, functional, and easy-to-print replacement part that brings the appliance back to…
The original knob was just a default solid chunk of plastic and thus retained the heat. (Needed an oven mitt to remove the slowcooker lid.) The new design needed to be solid enough to be stable, but allow heat to disperse. Two files:…
This is a replacement for the Cuisinart CRC-400 and CRC-800 rice cookers lid handle that is known to break easily. This part gets hot, so make sure you print with a plastic that can handle some heat like PETG, avoid PLA. Print…
The longest part of this build is waiting for the enclosure finish printing. If you need a guide for this, just follow the Sous Viduino by Adafruit . My Arduino code . A quick breakdown on my specific setup: Arduino as the brain, and Uno…
I have an old ALNO kitchen. The panel of the cooker falls down because the rails are completely disconnected from it. So I created a 3D model in order to replace them. The pannel was originally held by plastic rivets end I think that my…
A simple replacement ignition button designed for a Diplomat cooker but may be compatible with other brands of cookers.
A sous vide cooker is an excellent way to help keep a room warm and humid. When my wife caught covid we used this to keep her comfortable during the cold, dry nights. The original Anova cooker has bright LEDs that cannot be turned off,…
Replacement plain 8mm dia. D-shaft knobs for Kenwood CK 405 range cooker. I assume they would work for anything else with that spindle! FreeCAD file included in case you want to add numbers or symbols. I'm still working out how to do…
The plastic spacer that attaches the handle to the glass lid broke on my DeLonghi DCP707 slow cooker . I designed a new one and printed it with colorFabb HT (a high-temp PETG rated to 100*C). The print would also work with ASA, ABS or PC…
Print 5 pieces of slats out in PETG or higher temperature resistant material (there are 5 on the plate in the .stl) and clip them together. It should be pretty obvious how they go together. Look at the photos if you can't figure it out.…
Requested by a reddit member, modeled by me after a picture Category: Kitchen & Dining
If you are looking for the bracket that attaches the Anova to the water bath, see my companion design here: Sous Vide Water Bath Bracket - Fits Original Anova Precision Cooker by Stefan | Download free STL model | Printables.com The…
Migrating from thingiverse https://www.thingiverse.com/thing:3831884 Handle for a generic small slow cooker. the one that came with it broke into pieces. more like crumbled into pieces. slow cooker has a diameter of 21.5cm mounting holes…
The original filter from Boman is useless in my opinion. Since so much was saved with the activated carbon that odors are not really removed. Therefore, I have made my own filter, this can be filled with activated carbon itself. To do…
Best printed in black filament to match the other handle. Print with supports in the orientation that the model comes in
I lost my original measuring cup fro Xiaomi Rice Cooker one so I made a copy using my firend's PETG - recommended - due to food contact Feel free to modify and share - skechup file included
Simple design for your xiaomi Ocooker blender. You need - 2 screws for each holder you print to attach it under kitchen cabinet Skechup file included - feel free to remix and share! Consider tipping me if you are satisfied with my design…
Print with TPU, your desired infill (I did 15%), and 4 walls. Just press fit back into place like the OEM one.
