Threaded Dust Cap for gas cooker pressure hose
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Protect your gas hose with this slightly overengineered dust cap
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 60
- Makes
- 2
- Views
- 276
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you have a gas cooker outside which is not always connected to the gas tank, you will eventually end up with a gas hose which accumulates dust and debris in your garage/storage.
For this reason I designed a dust cap which allows you to just screw it on the lefthand thread.
There are two versions:
Plain and simple and slightly over-engineered. Feel free to use the one you like :)
I would recommend to print with 0.1mm layer height to get a nice thread. For infill I used 5%. No supports needed.
Note: I live in Germany and all adapters for gas cookers have the same thread . If yours does not fit, let me know in the comments.
Like all my work, this one was also created with onshape. Feel free to adapt the model to your own needs. Heres the link
Happy printing!
Feel free to support my work :)
