Magefesa pressure cooker knob / Pomo Olla Magefesa
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Imported from Thingiverse (2020)
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 26
- Makes
- 1
- Views
- 119
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Imported from Thingiverse (2020)
Replacement knob for Magefesa classic pressure cookers, Star model.
UPDATE:
I printed this with PLA+ which has a heat distortion temperature of 52°C. Knob inner geometry deformed a bit after first use due to the high temp transmitted by the metal insert and screw. I therefore recommend using a material with better thermal resistance such as PETG or ABS.
V2 model updated with a bit tighter dimensions.
Notes:
Printed on its top side to reduce supports.
I recommend using a material with much better heat distortion temperature such as PETG or ABS as my PLA+ part deformed after first use.
Preferably use 4 walls or 1.6mm, and a good 3D infill such as Cubic or Octet. If possible less than 5mm of distance between infill walls.
Category: Kitchen & Dining