Magefesa pressure cooker knob / Pomo Olla Magefesa
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Imported from Thingiverse (2020)
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 121
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Imported from Thingiverse (2020)
Replacement knob for Magefesa classic pressure cookers, Star model.
UPDATE:
I printed this with PLA+ which has a heat distortion temperature of 52°C. Knob inner geometry deformed a bit after first use due to the high temp transmitted by the metal insert and screw. I therefore recommend using a material with better thermal resistance such as PETG or ABS.
V2 model updated with a bit tighter dimensions.
Notes:
Printed on its top side to reduce supports.
I recommend using a material with much better heat distortion temperature such as PETG or ABS as my PLA+ part deformed after first use.
Preferably use 4 walls or 1.6mm, and a good 3D infill such as Cubic or Octet. If possible less than 5mm of distance between infill walls.
Category: Kitchen & Dining