2649 modeli
This is a collapsing Katana sword designed to be printed as one part. Its only 182mm high when printed but expands to over 825mm in total length! The Replaceable Single Edged Curved Blade Version is available to my Clubs members. Supports…
This collapsing Katana is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
This version of the Drill Sword prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
This is a collapsing Lightsaber designed to be printed as one part. Its only 205mm high when printed but expands to over 950mm in total length! Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…
This is a collapsing sword designed to be printed as one part. Its only 140mm high when printed but expands to over 860mm in total length! This version of the Jian prints complete all as one part. The Replaceable Blade Version is…
If you can successfully print this with NOTHING attaching the rings together, then you should be able to successfully print the print-in-place version or the blades concentrically. There is a new “clearance” test print, you can find here…
This version of the Master Sword prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
This collapsing dagger is designed to be printed as one part. Its only 130mm high when printed and the blade extends to 260mm long! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…
Collapsible Basket Optimized for 3D printing This basket prints in place as one part and doesn’t require any supports. It prints flat but folds it into a basket! This is a remix of the first collapsing basket I designed, that version uses…
This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. The hilt is 209mm long with the cap…
This is a collapsible hand fan where the blades interlock in a way that they can't over extend or pass through their collapsed state. Just take care not to break the tabs, especially with brittle materials. They can break when extending…
This Lightsaber has a removable collapsing blade that can be printed separately in a different color. The hilt is designed with a screw on cap which allows the blade to be inserted after its printed. Prints without supports, but you will…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
Want the same results? Click here to find the filament I use for results like these. This super satisfying fidget can be customized to be any shape or size with the simple adjustment of a number! I have added 9 sizes that are ready for…
katana s desingem Naruto
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This katana prints complete all as one piece, the files are split for multiple color printing with a AMS or MMU. The Replaceable Blade Multi-Color version is available to my Clubs members. Supports are not required, for best results use a…
Original Model by Mr_Andre https://**********.com/en/models/1033319-stainless-katana-sword-print-in-place#profileId-1016589 Design Concept This red column features a unique stackable design that can serve as an intriguing display piece or…
je potřeba prolomit první vrstvu u čepele
This is a collapsing sword designed to be printed as one part. Its only 142mm high when printed but expands to over 860mm in total length! The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best…
Bonjour, Voici une épée dépliable, un projet qui m'a beaucoup amusé ! ATTENTION : Vous ne pouvez pas vendre ni le modèle imprimé ni les fichiers numériques ! Pour une licence commerciale merci de me contacter par mail à…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This collapsing Spear is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This is an evolution of my original Collapsible Katana design with a some improvements: The kissaki is now included as part of the innermost sword section, which means no assembly is required to print it. This results in a much cleaner…
This tower was created by aclugston519 from thingiverse. The thin walled version did not work for me so this is the thick walled version. It printed perfectly as is with the exception of painted supports for the top piece. See…
A remix of 3D Printing World 's Collapsing Katana except I removed the robot logo on the bottom of the katana.
Collapsing Jian This is a collapsing Jian, which is a type of Chinese sword. It's a "Print in Place" design that is only 200mm tall when printed but extends to over 800mm long The Replaceable Blade Version is available to my Clubs…
Land Ho! Sail the seas with the help of your Print-In-Place Collapsing Pirate Spyglass! This telescoping spyglass expands to almost 400mm! Print Settings No special settings are required. If you would like to make a 2 color version, you…
Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Das Katana ist insgesamt ca. 910mm Lang und der Griff ist ca. 210cm hoch. Wenn ihnen das Modell gefällt bitte nominieren. Veröffentlichen, verteilen,…
Since I love this test for calibrating new printers and couldn't find it on prusaprinters.org, I uploaded it here. Please note, this is not my work! Autodesk and Kickstarter have developed a common standard that enables people to assess…
This is a collapsible sword that is similar to other models that can be found on this site. Choose between two different designs, a sword or lightsaber. Everything can be printed without support. The size is more aimed at children, but…
This collapsing Archangel Blade is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
This is a 10:1 scale of a Lego lightsaber with a collapsing blade. This version prints complete all as one piece. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm…
This version of the single edge curved blade collapsing katana prints in place all as one part. The Replaceable Blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…
Fish with collapsing sword inside. You can use 8x2mm magnets for head attachment. I recommend printing it from petg for better durability. Happy printing!
This collapsing sword is designed to be printed as one part. The multi-part and the single-color replaceable blade versions are available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed…
inspired by the popular ones, i made this myself because i want to sell them. make sure your settings are perfect.
katana s desingem the witcher na hraní či na dekoraci
Stützen sind nicht erforderlich, für beste Ergebnisse verwenden Sie eine 4-mm-Düse. Veröffentlichen, verteilen, verkaufen oder handeln Sie die Dateien oder physischen Modelle dieses Objekts nicht.
🎄⭐ Print as is, no supports and layer-height .15mm (the lower, the better, as it results in more stable overhangs. More than .3mm and model will not slice correctly), 100% infill. Also you might need to slow down your speed as this model…
The model can still be print in place and print the cap separately. For those having difficulty printing the blades in place these can be printed separately too, just printing the broken section.
A smaller Collapsible Light Saber with twist lock blade retainer. Easier to print, 180mm extends to 900mm New blade design extends to a consistent length and blades can be fitted if they're not perfect. !! Important: !! Blade models are…
This is my silliest design yet, but fun to play with anyways :-) It is a collapsible sword (or lightsaber, or magic wand), that is small enough to fit in a pocket. After printing, inset the 5 parts of the blade into the hilt and close it…
Collapsible Christmas Tree Fidget Toy Looking for a fun, interactive, and festive addition to your holiday season? This 3D printable Collapsible Christmas Tree Fidget Toy combines the joy of Christmas with the satisfaction of a fidget toy.
This collapsing sword is designed to be printed as one part. The multi-part and the replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
collapsing sword inspired by "3d printing world". you can print the blade separately and slide it in the back.
After some friendly suggestions, I am leaving a ko-fi link here for anyone who wishes to support me, no expectations: https://ko-fi.com/feetoffthetable ***Edit*** - added a flattened point version for anyone who doesn't want a sharp…
Here is the next Design from my "Open Drawer" Series. It is a full lenght drawer guide, that does not need any bearings! This Drawer Guide (in Germany its called Vollauszug btw.) uses the smooth surface of the PLA to run smoothly, so you…
I have lost this part for my lamp so I made one. Inner thread diameter is 40mm. Tested in PETG.
This print is used to gauge your success when printings a print-in-place collapsing sword or lightsaber. Each ring has a different amount of clearance. How many rings are free after printing will tell you what clearance your printer is…
In the leaf model, you need to change the color at about 6mm height to look cool. 잎사귀 모델 출력시 6mm 높이에서 초록색으로 바꿔주면 더 좋습니다
katana bez loga
Coin diameter, 5cm (2" approx)
This sword is designed to be printed all as one part. This is my take on a collapsing William Wallace’s Scottish Claymore. Not only is it ridiculously large but I also added another blade segment so it extends even farther. Its prints at…
I've reworked this design, which I think is brilliant, so that it fits on the mini's bed. I've kept the same specifications as the original model (mechanical spacing and thicknesses) . I added a few fillets and lightened the final piece a…
This katana prints complete all as one piece, the files are split for multiple color printing with a AMS or MMU. The Replaceable Blade Multi-Color version is available to my Clubs members. Supports are not required, for best results use a…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
Travel phone stand, lightweight, foldable. Low filament need(cca 11-13m). Radius (A,B,C,D,E,F) and Edge (G,H,I,J,K,L) versions. Size 130(high)x65(width)x90 (A,B,C,G,H,I) 130X70X90 (D,E,F,J,K,L) Hole for cable 4.9mm. Edge versions…
This is the second version of my previous collapsible Christmas tree design. The first version can be found here: https://www.thingiverse.com/thing:4675040. There are two versions of this Christmas tree: one using the 5-point star as the…
This version of the Rey’s Collapsing Lightsaber prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. External supports are not required but there are some built in supports for the on/off…
Printed this on a Sovol SV06 without too many issues. I had stringing between the blade segments so watch out for that. This would be pretty easy to modify for print-in-place, but I wanted to print the blade in a different color. The…
Keep your beverage well above the sand and dirt with this collapsible cup holder spike. The pointy end presses easily into sand or soft earth. Each section has a screw thread at the end so that as you extend each inner section, it can be…
Someone requested a customizable collapsible sword - and here is my take on that topic. I decided to print a wand, but you can choose a more sword-like shape. Collapsed length, number and thickness of segments - your choice also affects…
Straight out Hazbin Hotel, m eet Alastor, the enigmatic “Radio Demon”, known for his powerful sorcery and status as one of Hell’s most feared overlords. Once a notorious radio host and serial killer, Alastor’s transition to the afterlife…
Model Crates are great! They're even better if they're miniature, collapsible and stackable! This is a simple print that goes together without any hardware and can hold all of your little bits and pieces on your desk or workbench. Build…
Print in Place Folding Hanger Designed to fit on smaller machines while being sturdy enough for most clothing items. Changelog : 11/12/21 Release 11/14/21 Update: Curved files have been added. 3/8/25 Update: Removed confusing files,…
Overview I always seem to lose my shirts' collar stays when doing laundry. Luckily, they are simple and fast to print! 3D printing collar stays also allows for easy customization, like the chevrons I've included on the version I printed.…
This collapsing sword is designed to be printed as one part. The replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
Deadpool Collapsing Katana (Print in Place)
This is a complex model, gcode is not included, as modifications according to your application are assumed. For new downloads/builds use model version 8. Previous versions are deleted. Update available (Bullet_feeder.8.rsdocx) New bullet…
This is STILL A WORK IN PROGRESS. This is a remix of the amazing model created by Polymath314 on Thingiverse. I've also linked the 2 collapsing darksaber models that inspired me. Altho This is NOT technically a remix of either of those…
This version of Yoda’s lightsaber prints in one piece except for the front guard which is printed separately and glued The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm…
This Frozen themed Wand i desinged as a Birthdayparty giveaway, comes in three pices to ensure all funktionality and the ability to be more colorfull. I did a little hack when slicing the Stick-Model. I set a Hight Range Modifier from the…
Using Open SCAD you can quickly enter your dogs name and your phone number to create a flexible tag that can be worn on your dogs collar. Very easy to use Open SCAD software and you simply click the STL button (once you have added your…
Version 2.0 Now Available The new version has a thicker base structure and inset guides to strengthen the arms and provide overall better grip. Much less chance of the case slipping off the strap or deforming over time and the overall…
This collapsing sword is designed to be printed as one part. The multi-part replaceable blade version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to…
Collar Holder for Apple AirTag. Currently I have models for 25mm, 20mm, 15mm, 13mm and 10mm dog/cat collars. If you need different size message me and I will add it. Require minimal supports to print, you can find support configuration in…
This version of the Obi-Wan’s Collapsing Lightsaber prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. External supports are not required but there are some built in supports for the buttons,…
This is my Collapsible Dice Tower. It collapses to half a page size (200mm x 150mm), 12mm thick. For gaming no assembly, no magnets no clips are needed to make it ready to go. Some materials are needed additionally to the files provided…
Mosquitos…. They always bite in the wrong places. Here is my answer on how to scratch the back of your body when those tiny bloodsuckers find a way to get to you. Replaceable Heads This was printed with Fusion the threaded hole has the…
A collapsing lightsaber, model Darth Maul, based on @3DPrintingWorld original idea. The hilt is designed from scratch, but the blade can be re-used. Designed using FreeCAD, the project file as well as my own FreeCAD template are included.…
This is a Collapsing Viking Sword - designed to be printed as one part. You can easily print in 0.3 L.Height if you want to save some time! ( Easy to print NO raft or support needed! ) Print Settings Rafts: Doesn't Matter Supports: No…
Collapsable fidget Santa's hat. A cool Christmas decoration. It looks nice and is fun to play with. It's very easy to print. No supports, etc. When you print the hat in red, you should change the color to white on layer 106. Unless you…
This is a fun gift to print for Star Wars and Lego lovers! Print Setting: Hilit - no support, 10%-15% infill Cap - no support, 10%-15% infill Blades - use “vase mode” or in cura “spiralize outer contour (smooth)”
I loved the idea of 3D Printing World's design of the expanding katana but soon realized it took 9 hours and 110 grams of filament, I was also scared that the sword would break and I would have to print is all again. This expanding sword…
Nice collapsible carrot which can be magically pulled from your hand. Or from a combination safe lock box or from an egg shell . Prints mostly in place, just the carrot tip have to be inserted into the collapsed carrot body and pushed…
Collapsing Sith Lightsaber Dual Extrusion Same as my original lightsaber but designed for dual extrusion. Detailed printing instructions can be found on my website . Printed on the Mudlex rep-rap IDEX printer. Single extrusion version:…
For optimal results, print the model using a 0.4 mm nozzle. Almost all parts can be printed "in-place" (as a single piece) without support structures—only the lid needs to be attached afterwards. All blades are fully interchangeable. I…
Update 30/07/22; I have Uploaded V3.4, This generates a Single Custom Bellows without throwing any errors. V3.4 also includes an automatic two stage bellows generator. You can now print the bellows in two parts allowing for longer bellows…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
This version of the Qui-Gon’s Collapsing Lightsaber prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. External supports are not required but there are some built in supports for the button,…
Learning from my first design, this is a 2" barbell collar/clamp that is entirely print-in-place. No additional hardware required. I printed mine with a .6mm nozzle and .2mm layer heights – but a 0.4mm should work just fine as well.
Let me introduce you to my minimal-assembly collapsible lightsaber with a lever lock. Not including the blades, the hilt only uses 3 parts! The blade is interchangeable to be any color you like, and you can add the dual lightsaber mods to…
I split the katana and blade so that you can have the blade and handle different colours. Print instructions Print the blade first in the color of your choice. When slicing the Handle, add a "Color Change" in PrusaSlicer at 180mm just…
Collapsible / Rotatable Clothes Hanger (Print in Place) This collapsible / rotatable clothes hanger weighs little, is easy to store and is perfect for on the go. The rotation locks into the open and closed positions with a loose fit. If…
Designed with meticulous attention to detail, the model features a textured tsuka (handle) with intricate patterns that emulate traditional ito (braid). The tsuba (guard) boasts a classic aesthetic with a contemporary twist, while the…
