Collapsing Swords and Lightsabers Test Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a test print for printing collapsing swords and lightsabers
- Ocena
- 4,838 / 5
- Polubienia
- 1850
- Pobrania
- 34 144
- Wydruki
- 141
- Wyświetlenia
- 74 556
- Oceny
- 117
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Standard Digital File License
If you can successfully print this with NOTHING attaching the rings together, then you should be able to successfully print the print-in-place version or the blades concentrically.
There is a new “clearance” test print, you can find here. I would use that print to test your printers ability to print a clearance, and this print to better tune the seam.
Be sure to to look closely, even if nothing is attached try tuning for the smallest seam.
The test print is a total of 24mm high so I change settings every 8mm(3x) then compare the changes until I achieve the best result. The settings that will have the most impact are; flowrate, retraction distance/speed, coast, wipe, and extra restart distance. You may also try; seam location, speed, temperature, and z-hop.
Find detailed instructions on how to print collapsing swords on my website.
Do not repost, distribute, sell or trade the files or physical models of this object.