Collapsing Swords and Lightsabers Test Print
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a test print for printing collapsing swords and lightsabers
- Rating
- 4.838 / 5
- Likes
- 1,854
- Downloads
- 34,181
- Makes
- 142
- Views
- 74,630
- Reviews
- 117
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Standard Digital File License
If you can successfully print this with NOTHING attaching the rings together, then you should be able to successfully print the print-in-place version or the blades concentrically.
There is a new “clearance” test print, you can find here. I would use that print to test your printers ability to print a clearance, and this print to better tune the seam.
Be sure to to look closely, even if nothing is attached try tuning for the smallest seam.
The test print is a total of 24mm high so I change settings every 8mm(3x) then compare the changes until I achieve the best result. The settings that will have the most impact are; flowrate, retraction distance/speed, coast, wipe, and extra restart distance. You may also try; seam location, speed, temperature, and z-hop.
Find detailed instructions on how to print collapsing swords on my website.
Do not repost, distribute, sell or trade the files or physical models of this object.