Zanussi Gas Cooker Knob
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Knob for Zanussi cookers/hobs with a 6mm diameter 'D' shaft.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 38
- Makes
- 0
- Views
- 140
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Modelled on the broken one in my kitchen. Not sure what exact Zanussi model, but the D-shaft measures 6mm nominal diameter with depth of approx. 17mm. It's a comfortable press-fit, and deep enough to engage the igniters when pressed.
Example print settings per photos:
- Elegoo Centauri Carbon, 0.4mm nozzle
- Tinmorry Metallic PETG @ 250°C
- 0.25mm support Z distance (for cleaner separation).
- Variable layer height (Min 0.12mm only for the detail in the flame symbols, which I have not included in this upload because they are not my own)
- Ironing all top surfaces, 30%
- Inner/Outer/Inner wall order
- 4 wall loops, 5 top/bottom shells
- 25% infill
- Painted tree supports on the large flat overhangs only (not inside the dome) - see pic 3 & 4 for example
Remember to align your seams! I forgot and it's visibly off-centre. I can't be bothered printing another example though.
Better surface finish may be achieved by orienting the top of the knob on the print bed, but I haven't tested this for supports.
I wouldn't recommend PLA for this due to nearby heat & flame.