Slow Cooker Handle Replacement / Upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slow Cooker Handle Replacement / Upgrade Please print on it's side and then no supports will be required.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 34
- Makes
- 2
- Views
- 197
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Slow Cooker Handle Replacement / Upgrade
Please print on it's side and then no supports will be required.
IMPORTANT:
Upon testing this design while cooking for 24 hours, the PETG print got soft enough for the Bolt to slide out.
So, I drilled through, and put a NUT + BOLT Combination so that even if the PETG softens, the NUT will be holding the bolt back.
Hope this helps!
The model is available for free download and use.
If you still want to invite me for a coffee for my effort, troubles and time, you can do it via:
https://www.paypal.com/paypalme/avicode
Thanks!