A1-Mini-RearMountAMS+External-Rear-Bridge-Feeder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Combination of the bridge of the AMS lite and the external spool for manual feeding.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Standard Digital File License
This creation is inspired from the 2 designs from @danam1750 (A1 Mini Z-Axis Filament Feeder / Connector )and @Dust_Ash (A1 Manual Filament Change - Rear Module).
I created this design to combine the bridge of the AMS lite and the external spool for manual feeding.
Additional parts is used in this design are 10 pieces of PC4-M6 pneumatic connectors and
Printed in Bambu Lab PETG-HF filament with the settings below with AMS
Nozzle = 0.4mm
Layer height = 0.16mm optimal
Strength:
Wall loops = 4
Top surface pattern = Rectilinear
Bottom surface pattern = Rectilinear
Sparse infill density = 20%
Sparse infill pattern = Gyroid
Support = enable