A1-Mini-RearMountAMS+External-Rear-Bridge-Feeder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Combination of the bridge of the AMS lite and the external spool for manual feeding.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Standard Digital File License
This creation is inspired from the 2 designs from @danam1750 (A1 Mini Z-Axis Filament Feeder / Connector )and @Dust_Ash (A1 Manual Filament Change - Rear Module).
I created this design to combine the bridge of the AMS lite and the external spool for manual feeding.
Additional parts is used in this design are 10 pieces of PC4-M6 pneumatic connectors and
Printed in Bambu Lab PETG-HF filament with the settings below with AMS
Nozzle = 0.4mm
Layer height = 0.16mm optimal
Strength:
Wall loops = 4
Top surface pattern = Rectilinear
Bottom surface pattern = Rectilinear
Sparse infill density = 20%
Sparse infill pattern = Gyroid
Support = enable