1 / 2
15 Degree Feet For 20" Lakewood 200 Brace Blade Box Fan — zdjęcie 1
1 / 2

15 Degree Feet For 20" Lakewood 200 Brace Blade Box Fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These feet are for a Lakewood 200 20" Box Fan. Tilts fan back at a 15 degree angle to better circulate air in a room.

Ocena
0 / 5
Polubienia
3
Pobrania
22
Wydruki
0
Wyświetlenia
97
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Original Description: 
“*Please share your feedback in comments, and give me a good rating if it fits your fan. =)*

These are replacement feet for a Lakewood 200 20" Box Fan, but it may fit others. I included measurements to hopefully give you an idea of it will fit your fan. 

Most box fans are the same patent and they are just manufactured by different companies, so it may fit quite a bit of other models. Please let me know if it does not fit your model in the comments.

Make sure you lay the feet on the side, so they print properly.”


I adjusted this model to allow the fan to kick back at a 15 degree angle to better circulate the hot air that builds up by the ceiling. It is recomended to use supports where you see red in the provided image.

Tagi