ThingPulse ESP32 Color Kit Grande Case and Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thing Pulse Color Grande esp32 with 3.5" screen, case and magnetic stand
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 169
- Wydruki
- 1
- Wyświetlenia
- 429
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
https://thingpulse.com/product/esp32-wifi-color-display-kit-grande/?_gl=1*17h6fqa*_up*MQ..*_ga*MTUyMjg0MjY2My4xNzUyMTc1NDg4*_ga_YQQ4TG85MT*czE3NTIxNzU0ODckbzEkZzAkdDE3NTIxNzU0ODckajYwJGwwJGgw
I bought this fun little kit with the intention to use it for prototyping and learning about how useful ESP32's can be. So far all I've done is build a case for it and run the sample software for a weather display, but no one had a ready made 3d print for it.
This case is my attempt to turn this into a real useful dev platform for me. I included a magnetic stand and gridfinity base for it if you want to glue them together.
I double checked my magnet depths, but I had a new superglue and got them twisted at the final install. I promise they dry fit well. 6mm circle by 2mm depth
I did end up using supports in order to have the nice big chamfers on the corners. Sorry about that. It will print without them though.
V33 only mounts vertical
V35 mounts vertical or horizontal