Rooftop Tent Pole End Cap & Rain Guard / O-Ring (5mm, Thule Tepui Kukenam 3)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
End cap and o-ring for 5mm rooftop tent poles (Thule Tepui Kukenam 3). Protects fabric and prevents rainwater from runni
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 451
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are two simple but useful 3D-printed parts for tent poles with a 5mm diameter, originally made for the Thule Tepui Kukenam 3 rooftop tent (but should fit similar tents too).
One is an o-ring that helps stop rainwater from running down the pole into the tent. The other is a small end cap to protect the tent fabric from getting damaged by the pole tip.
The end cap is a press fit and stays in place. The o-ring is loose enough to move by hand but won’t slide on its own.
I printed these in PETG, but I recommend TPU for the o-ring (flexible) and ASA for the end cap (UV-resistant).
These are small parts but very handy, especially if you’ve lost the originals, as they are very loose (after 2 years of not very much use)
Included Fusion 360 file if you want to tweak it to fit.