Edward II - 150g Antweight Robot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
150g Antweight Robot with a spicy stick! Soldering Iron weapon to decimate other plastic bots
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Basic Antweight designed to use a Generic 8W soldering iron element and Generic 20A RC switch to melt its opponents! on 1000RPM N10's its incredibly nippy.
This is a very old design, so it has a few Issues. These should be fixed in the V2 Revision
Space is a little tight due to the motor mounts, If I ever do another revision for this robot it will remove them in favour of a standard slot-in body.
Space inside the helmet for an LED, and a little hole to mount feathers, flags and suchlike to the top.
Tested on 2S and 3S, the iron gets red hot in about 7 seconds, but its extremely easy to damage when it gets this hot. We go through an iron pretty much every single fight, so its a bit of a pain to run if they aren't prepped with connectors beforehand.
Future 4S version is in the works, if I ever get the time to redo this.