1 / 6
Sukhoi Su-35 jet fighter (display model)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sukhoi / Suchoj / Su-35 geometric low poly display model with custom stand (heavy and lightweight stand versions)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (13)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (6)Powiązane
RECOMMENDED LAYER HEIGHT: 15mm
!!! BOTTOM WING GUN HAS TO BE PRINTED 4 TIMES TO GET DESIRED RESULT !!!
(for multicolor look as on picture you will need MMU or AMS, otherwise you can color it yourself or leave blank, it also looks good)
YOU WILL NEED:
- GLUE
- TO KNOW HOW TO USE SUPPORTS
- IQ HIGHER THAN 20
INSTRUCTIONS:
- CHOOSE if you will print lighter or normal stand version (stand arm is different for each one as well), this depends on your infill of the stand and plane, also on the weight of the filament
- PREPARE your build plates (can be more if you want different infill for stand which I recommend)
- SET supports for enforced only and paint them in the following places (BOTH PLANE PARTS RIGHT AND LEFT) as on the following picture (or blue marked unstable places in prusaslicer or different)
4. PRINT everything and the part BOTTOM WING GUN 4 TIMES
5. GLUE everything together (right wings on right side of plane, left on left)
6.HAVE FUN :D