1 / 3
Bearing Holder With Pin cutout (to print in a stronger orientation)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds clearance for bearing Remixes part so you can just print 2x of the same one and snap together adds pin for strength
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 91
- Wydruki
- 3
- Wyświetlenia
- 446
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (1)Kolekcje (21)Powiązane
Print the pin on it's side and print the roller bit on it's back. should be supportless.
I printed it at optimal on Elegoo CC, with Rapid PETG