1 / 7
Insect Watering Trough
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small octagonal insect watering trough.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 14
- Wydruki
- 1
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Insect Watering Trough
As it is getting warmer and warmer and the flower boxes on my balcony with the wildflowers - as well as my ‘insect hotel’ - are well visited by insects, I decided to create a small octagonal insect watering trough.
The trough is available in two sizes, inner diameter 100mm and inner diameter 150mm.
Trough 100
- Outer diameter: 104.0mm
- Outer height: 17.0mm
- Inner diameter: 100.0mm
- Inner height: 15.0mm
Base 100
- Outer diameter: 103.1mm
- Outer height: 6.0mm
- Inner diameter: 102.1mm
- Inner height: 5.0mm
Trough 150
- Outer diameter: 154.0mm
- Outer height: 17.0mm
- Inner diameter: 150.0mm
- Inner height: 15.0mm
Base 150
- Outer diameter: 153.1mm
- Outer height: 6.0mm
- Inner diameter: 152.1mm
- Inner height: 5.0mm
And yes, I like geometric shapes better than round ones. ;)
Fittings
- Optional 1 to 5 magnetics 10.0mm x 3.0mm.
Temperatures, Speed and Materials
- Filament: PETG
- Printing speed: 150.0mm/s
- Perimeter: 4
- Layer: 0.2mm
- Infill: 10%
- Infill pattern: Adaptive cubic
- Print temperature: 240 °C
- Temperature hotbed: 75 °C
- Brim: No
- Support: No
Approximate Printing Times and Filament Quantities
Print times are also based on my Anycubic Kobra 2 Plus.
- Trough 100: Time: ~1:21h, ~Quantity: ~31.88, ~10.60m
- Base 100: Time: ~0:32h, ~Quantity: ~11.21gr, ~3.37m
- Trough 150: Time: ~2:21h, ~Quantity: ~57.83 gr, ~19.23 m
- Base 150: Time: ~1:05h, ~Quantity: ~24.88 gr, ~8.11 m