1 / 5
REMIX: Elegoo neptune 3 sherpa direct drive mount Remixed by EGGo — zdjęcie 1
1 / 5

REMIX: Elegoo neptune 3 sherpa direct drive mount Remixed by EGGo

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple and easy mod for your Elegoo Neptune 3 to get a proven direct drive extruder

Ocena
0 / 5
Polubienia
2
Pobrania
6
Wydruki
0
Wyświetlenia
81
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a remix of the "Elegoo Neptune 3 Direct Drive Sherpa Mini Extruder" by  aTinyShellScript , licensed under CC BY 4.0.

Update:V1.2

  • fixed some minor tinker cad artifacts

My goal with this remix was to improve structural durability and printability, especially for users who experienced breakage or weakness around the mounting areas. The model was edited using Tinkercad and is fully compatible with the Elegoo Neptune 3 (non-pro, non-plus, non-max) and a range of Sherpa-style extruders including:

  • Sherpa mini
  • Sherpa heavy

You can use pla but you may experience slight warping due to it being close to the printers bed and using pla may cause your mount to break easier. You may want to print the model in petg, abs or asa for the best results :) 

 

You can use heat-set inserts, but if you're unable to, M3 nuts will work as well. Depending on your setup, you may need to use longer screws to mount the extruder securely.

Tagi