Quick print handlebar shim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Accessory shim for 22mm motorcycle handlebars
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
A very simple handlebar or rail shim for mounting accessories or brackets for a 25mm (1 inch) bar to 22mm motorcycle handlebars. Printing time is around 7 minutes per shim. They are thin enough to easily run a craft knife blade down, making a cut for sliding over the bar or for cutting into two parts if required to slide in afterwards.
Printed in PETG to resist UV and heat with a 0.4 nozzle.
The scad file is included to amend sizes as needed.
This is NOT a shim intended to use for the main mounting points of handlebars, it will not have the required strength. Use is for accessories or additional switches etc.