Ball Labyrinth Game - Joystick Operated
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A marble labyrinth board game.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ball Labyrinth Game - Joystick Operated
When I was little, I remember having a similar game like this, but I couldn't find it again, so I designed this little contraption. It's very easy to put together, and the moving parts are very easy to replace if they were to break, since they cost very little filament. This is my version of the maze, and I invite everyone to try making their own!
Printing tips:
- All 3mf files must be printed and then assembled.
- Gear1 requires to be printed in Pla. Everything else can be pla or petg.
- When printing with petg the standard settings are very slow, you can change the volumetric speed of the material, in the slicer, to get a much faster print.
Assembly Guide:
Take the first piece and bend the extremes as shown in the picture:
Insert it in the base with the long part near the edge:
Insert the cylinders as shown:
First insert the labyrinth in its base and then put everything together:
-You can use glue to stick one piece to another, just be careful not to glue the parts that should be able to move. I haven't used it because it works just fine and makes for easy maintenance in the future.
The ball:
You don't have to print it if you already have one, it just needs to be less than 18 mm in diameter to fit into the holes.
Make your own labyrinth!
Download the stl and change it to create new challenges to play! Just in case I'll write the dimensions here: it's a 200x200 mm square, 4 mm thick; the holes have a diameter of 18 mm; the walls are 15 mm tall.