AKG K240 Detachable Cable Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part was designed to add a 3.5mm jack to a pair of AKG K240 headphones. Compatible with Monitor and Sextett models.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 178
- Wydruki
- 3
- Wyświetlenia
- 1627
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this part to add a jack to my AKG K240 Monitor headphones without permanently modifying them. The part replaces one of the existing pieces on the headphones and holds a 3.5mm jack from Adafruit (https://www.adafruit.com/product/3692). Similar jacks can be found on Amazon but I can't verify that the dimensions are exactly the same.
The print in the photos was done with Inland PLA on an Ender 3 Pro. I used a layer height of 0.12mm and printed the part jack side down. I used supports for two overhanging sections but your needs may vary based on your printer.
Edit: I have added a version with that is compatible with the AKG K240 Sextett.