1 / 3
Motor fan for 42xx or 40xx rc motors
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this model to cool my 4274 motor. The part should be secured with two ties. I used a 30x30 fan.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed this part from petg, but it is better to print it from abs.
To prevent the part from moving, stick double-sided tape to the back of the part.
Happy printing!