Sovol Zero 1515 extrusion cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A short, flat cap that clips into the weird 1515-esque extrusions in a Sovol Zero to help with hiding wiring.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is just a simple clip that snaps in flat against the 1515 extrusion channels inside the Sovol Zero, and leaves room for light-gauge wiring behind it (LED wiring, etc).
These are 15mm x 15mm, and sit very low against the extrusion, making them pretty inconspicuous. If you need a different size, download the step and just extrude it to the length you need in your CAD software of choice.
They're generally reusable; use a very thin flathead screwdriver or a bed/part scraper to pop them out. If you run a hot chamber, print this with a filament that's appropriate for the temperatures it'll be seeing.