Sovol Zero 1515 extrusion cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A short, flat cap that clips into the weird 1515-esque extrusions in a Sovol Zero to help with hiding wiring.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 42
- Makes
- 0
- Views
- 178
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
This is just a simple clip that snaps in flat against the 1515 extrusion channels inside the Sovol Zero, and leaves room for light-gauge wiring behind it (LED wiring, etc).
These are 15mm x 15mm, and sit very low against the extrusion, making them pretty inconspicuous. If you need a different size, download the step and just extrude it to the length you need in your CAD software of choice.
They're generally reusable; use a very thin flathead screwdriver or a bed/part scraper to pop them out. If you run a hot chamber, print this with a filament that's appropriate for the temperatures it'll be seeing.