N4Plus Voron Mantis with KNOMI2 + BTT EBB42 Toolboard + BTT EDDY + DXC Extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
N4Plus Voron Toolhead Revamp
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 382
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Printing Settings :
Layer Height: 0.2mm
Nozzle: 0.4mm
Perimeters: 3
Top/Bottom Layer: 3-4
Infill: 30%
Support: Maybe needed
Material: PETG/ABS/ASA
Assembly for the MantisDuct-Remix v1 :
1) 5015 24v Blower - 2pcs
2) 3010 24v Fan - 1pcs
3) BTT KNOMI/KNOMI2 - 1pcs
4) M3x4.5x3 Heat Inserts - 3pcs
Assembly for the Insert-KNOMI2 v1 :
1) M3x6 Cap/Button Screw - 3pcs
Assembly for the N4Plus-Voron-Carriage-Revamp-v2 :
1) M3x5x5 Heat Inserts - 6pcs
2) M3x6 Cap Screw (For Linear Rail MGN12H)
Assembly for the Hotend 3010 Fan :
1) M3x16 Cap Screw - 4pcs (For screwing on Mantis-Carriage-Revo Left & Right)
Assembly for the 5015 Part Cooling Fan :
1) M3x25 Cap Screw - 2pcs
Assembly for N4PlusMantis-5015ScrewMount v1 :
1) M3x6 Cap Screw - 1pcs
2) Heat Insert M3x5x4 - 2pcs
Assembly for the Mantis-Carriage-Revo Left & Right :
1) M3x10 Cap Screw - 4pcs (For E3D Revo Hotend)
2) M3x12 Cap Screw - 2pcs (For mounting on N4Plus-Voron-Carriage-Revamp-v2)
3) M3x16 Cap Screw - 2pcs (For mounting on N4Plus-Voron-Carriage-Revamp-v2)
Assembly for the N4PlusVoronMantis-DXCExtruder-EBB42-Mount v1 .2:
1) M3x12 Cap Screw - 2pcs (For mounting on N4Plus-Voron-Carriage-Revamp-v2)
2) M3x6 Cap Screw - 3pcs (For DXC Extruder)
[There's 2 “E” M3 Cap Screw Hole. This is design for in-case the DXC Extruder's heat insert come off, you may need to use drill a M2.8 hole to screw.]
Assembly for the N4PlusMantis-PG11-CableGlandHolder v1
1) M3x6 Cap Screw - 2pcs (For mounting on N4PlusVoronMantis-DXCExtruder-EBB42-Mount v1)
2) PG11 Cable Gland with torsion-proof - 1pcs
Assembly for the BTT EBB42 Toolboard :
1) M3x6 Cap Screw - 4pcs
Assembly for N4Plus-Probe-BTTEddy-Mount v1 :
1) M3x6 Cap Screw - 2pcs (For N4Plus-Probe-BTTEddy-Mount v1)
2) M3x18 Cap Screw - 2pcs (For BTT Eddy)
Related Links below:
https://www.printables.com/model/1357389-n4plus-voron-carriage-revamp-v2
https://www.printables.com/model/1188997-voron-mantis-with-knomi-remix-on-sv08-e3d-revo-hot
Happy 3DPrinting!