1 / 2
Absaugadapter Ø35 für Oberfräsen / suction adapter Ø35 for router
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Passt zu den meisten gängigen Oberfräsen / Fits to most routers.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 123
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Material: PLA+
Druckereinstellung: Layerhöhe 0,20 mm / Infill 20 % / Support partial
Kein zusätzliches Material erforderlich / no additional material required
Gutes Gelingen und über ein Like würde ich mich freuen.
Good luck and I would be happy about a like.