35mm Slide Mounts - Half Frame & Full Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
35mm slide mounts that snap together and hold film in place. Best in white PETG or preferably ABS!
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 129
- Wydruki
- 0
- Wyświetlenia
- 528
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
I worked up this design to fix an issue I was having, specifically that it's almost impossible to find half frame slide mounts. While I was at it, I made one for full frame slides too.
I designed the mounts with tabs that hold the film in place and keep it from slipping down into the mount. The tabs pull double duty by also holding the two parts of the mount together.
I'd recommend at least PETG for temperature resistance. In my testing it does get mushy after a while, but it still holds up better than some “real” vintage half frame mounts I've tried. ABS or ASA would be ideal though.