NFT Ape Vape to Battery Charger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NFT Ape Vape to Battery Charger This is a model to make a NFT Vape into a battery charger for 3.7v
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
NFT Ape Vape to Battery Charger
This is a model to make a NFT Vape into a battery charger for 3.7v
To make this charger you have to first:
1disasamble the vape and take out the inner pc without damaging the usb port or the screen
2then solder 2 female wires to the plus and minus cables of the pcb and then stick them into the holes of the case
3lastly put a ton of stuffing inside or something like hot gule to keep the cables in place as so they wont go furher back when you push a male pin inside
after this you can put the top part to conectr with the main one or you can use 2 scres on the sides if there isnt enough friction inbetween the 2 parts
thats it now you have a very versetile 3.7v battery charger wich always comes in handy especialy for seeing battery persentages of batteries or charging them,
SIDE NOTE!
you can also use the pcb as a makeshift battery charger for any other project so you wont have to buy any modules online