1 / 1
Sleave for battery for Yashica Electro 35 GS camera
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Electro took a mercury battery. This sleaves lets you replace it with a modern A28 battery and a spring from a pen
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
Here is a model I made for my Yashica camera. The cavity is based on the maximum published diameter of the battery, so one at the lower tolerance may wiggle a bit. Use a spring from a pen to bridge the gap of the contacts. Make sure you clean the battery cover, inner spring and pen spring. Please note the direction of the battery in the sleave and the insertion arrow. The battery goes in reverse of what you would expect.
