1 / 7
Fog Light Brake Duct - Toyota 86/Scion FRS/Subaru BRZ ZN6/ZC6 — zdjęcie 1
1 / 7

Fog Light Brake Duct - Toyota 86/Scion FRS/Subaru BRZ ZN6/ZC6

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement to your stock fog light. A starting point to ducting air to your brakes

Ocena
0 / 5
Polubienia
24
Pobrania
185
Wydruki
1
Wyświetlenia
1087
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

An easy print and fit starting point for replacing your fog light to duct air to your brakes. Mounts in the same way as the stock fog lights so shouldn't need any fettling or adjusting. It's a tight fit, but I made it to fill all the space to entrain as much air as possible. This is only the front half of the ducting. I need to try and make the rear at some stage. 

3” or 76mm tube barb on the rear side for easy tube sourcing. 

Setting the seam position to “rear” puts them on the upper surface hiding them fairly effectively. 

I made this for my pre facelift 2012 GT86/FRS.  I don't know if this will fit the facelift 86 or the either BRZ. I assume it would, but you shouldn't assume. If anyone does a test fit on the facelift 86 or BRZs please let me know if it fits or not?

 11-10-26 update: uploaded higher resolution files

Tagi