1 / 6
Honda CRF250L Handle Bar Mount for Trail Tech Vapor with Protective Cover — zdjęcie 1
1 / 6

Honda CRF250L Handle Bar Mount for Trail Tech Vapor with Protective Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Handle Bar Mount for Trail Tech Vapor to mount on Honda CRF 250 L Motorcyle

Ocena
0 / 5
Polubienia
3
Pobrania
12
Wydruki
0
Wyświetlenia
206
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a handlebar mount for a Honda CRF250L motorcylce to hold a Trail Tech Vapor tachometer.  

I printed this on a Bambu Lab X1C Carbon. The model was made with Freecad from scratch. I printed using PA6 CF filament which I dried for 24 hours prior to printing.  I have included the json zip file filament settings.  

You need a nylon carbon fiber filament for this to work correctly. I printed it first with PLA to prototype the fit.  I then printed with PA6 CF as described for stiffness/toughness.

Filament Settings to Avoid Spaghetti Failures

  • Print sequence set to print by object and NOT by layer! 
  • 290 Degree print head
  • Turned off all the fans 
  • Printed at 30 mm/s 
  • 50% infill in a Gyroid pattern. 
  • Order of walls was outer / inner 
  • Checked box to avoid crossing walls. Max detour length of 100 mm.  

Avoid Spaghetti Failure

Make sure to print sequence by object rather than by layer - if you don't do this with PA6 CF you will get a result like the spaghetti failure image I uploaded.

Tagi