Honda CRF250L Handle Bar Mount for Trail Tech Vapor with Protective Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handle Bar Mount for Trail Tech Vapor to mount on Honda CRF 250 L Motorcyle
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 206
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
This is a handlebar mount for a Honda CRF250L motorcylce to hold a Trail Tech Vapor tachometer.
I printed this on a Bambu Lab X1C Carbon. The model was made with Freecad from scratch. I printed using PA6 CF filament which I dried for 24 hours prior to printing. I have included the json zip file filament settings.
You need a nylon carbon fiber filament for this to work correctly. I printed it first with PLA to prototype the fit. I then printed with PA6 CF as described for stiffness/toughness.
Filament Settings to Avoid Spaghetti Failures
- Print sequence set to print by object and NOT by layer!
- 290 Degree print head
- Turned off all the fans
- Printed at 30 mm/s
- 50% infill in a Gyroid pattern.
- Order of walls was outer / inner
- Checked box to avoid crossing walls. Max detour length of 100 mm.
Avoid Spaghetti Failure
Make sure to print sequence by object rather than by layer - if you don't do this with PA6 CF you will get a result like the spaghetti failure image I uploaded.