Fence Dogs for 2020 Extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn your 2020 Extrusion into a Fence for your MFT or other woodworking setup!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have seen other creators mount aluminum extrusion to their woodworking setups and it appears to work really well, so I wanted to try it out.
To that end I have devised this simple mounting system that utilizes a pause to insert an M5 Hex Nut during a pause in printing.
Likewise, I have created various bases to account for variation in dog hole sizing between brands (and if you drilled the holes yourself). The base sizing ranges from 19.55mm to 20.05mm.
Test some out and find which one works best for your setup!
Check out the photos above for Print & Set-up Info :)
I would love to see how you use these in your set up
Print Suggestions
- Layer Height: 0.20
- Walls: 3-4
- Infill: 20% (I use Honeycomb)
- Support: see photos for support info
- Additional Notes: remember to add a pause while printing the base so you can add the M5 Hex Nut
HAPPY PRINTING!