Logitech G102/203 zerømouse Mod (For 2ⁿᵈ gen LIGHTSYNC ONLY)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Logitech G102/203 zerømouse mod by DavisSgt, originally inspired by optimumtech. For 2ⁿᵈ gen LIGHTSYNC ONLY.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 262
- Wydruki
- 0
- Wyświetlenia
- 1746
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a remix of DavisSgt's zerømouse mod for the Logitech G102/203, which was initially inspired by optimumtech. DavisSgt's model will not fit if your G102/203 is the 2ⁿᵈ generation LIGHTSYNC version. You can verify by checking the sticker on the underside of your mouse for the product number (P/N: 810-008818).
This remix serves to address the fitment issue.
NOTE - NOT compatible with G102/203 Prodigy or 1ˢᵗ generation LIGHTSYNC, you have been warned.
You will be using the stock screws from the mouse shell to secure the PCB to the model, in the same places as they were on the original shell. The two mouse buttons are secured using the screws that were underneath the mouse feet.
I have also included two optional parts that make it easier to press the DPI button. You can choose between the one that has an extended cover at the back to diffuse the RGB slightly (g102_dpiDiffuse.stl), or the one that's just the button (g102_dpi.stl).
Print notes:
Tested with PLA
Tested with 0.16mm layer height, but 0.20mm should be fine
Supports needed? - Yes, use tree supports for g102_btn.stl, at the suspended cutout area where the scroll-wheel goes (refer to screenshots)
Approx. filament weight (according to Bambu Studio)
14.68g without DPI part
15.74g with DPI part
16.71g with DPI + RGB diffuser part