ZANUSSI (ZFC245R) fridge shelf
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original replacement shelves are very expensive and/or not available. So i designed this one myself..
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Original replacement shelves are very expensive and/or not available. So i designed this one myself..
Print Settings
Printer Brand:
eMotion Tech
Printer:
MicroDelta Rework
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.3mm
Infill:
10%
Notes:
Printed with support and 10% infill.
About 100g (but I guess this design could be improved to use less matter).
How I Designed This
The 2 parts to print fit together in the fridge door just with 2 compressed wood boards cut just at the right length (about 70mm x 380mm for the horizontal board and 400mm x 35 mm for the vertical one).
No glue, no screws!
This assembly can supported several kilograms or bottles.
Category: Replacement Parts