ZANUSSI (ZFC245R) fridge shelf
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Original replacement shelves are very expensive and/or not available. So i designed this one myself..
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 17
- Makes
- 0
- Views
- 258
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Original replacement shelves are very expensive and/or not available. So i designed this one myself..
Print Settings
Printer Brand:
eMotion Tech
Printer:
MicroDelta Rework
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.3mm
Infill:
10%
Notes:
Printed with support and 10% infill.
About 100g (but I guess this design could be improved to use less matter).
How I Designed This
The 2 parts to print fit together in the fridge door just with 2 compressed wood boards cut just at the right length (about 70mm x 380mm for the horizontal board and 400mm x 35 mm for the vertical one).
No glue, no screws!
This assembly can supported several kilograms or bottles.
Category: Replacement Parts