UlMoNoB - The Ultimate Modular Nozzle Box

Features

• Supports V6/MK8/Bambu CHT style nozzles
• Add as many modules as you need
• Threaded holes to prevent spillage, but you can remove nozzles with just a couple turns
• Categorize and color code your nozzles
• V6 nozzles stand proud of the surface for easy grip
• Knurled surface with a gap for a label
• Compact design, 10 nozzles per module
• Fully parametric design

Instructions

• Print one base, one lid, and as many middle modules as you need
• There's a gap in the knurling to add a label using your slicer's text tool
• Insert nozzle as far down as it'll go, then give it a couple turns

Print settings

• 0.2mm or lower layer height, 0.4mm nozzle
• If things are too tight, I recommend changing slicer settings to print outer walls first. Or let me know in the comments and I'll generate models for looser tolerance

Parametric design

To change parameters, go to this link and adjust them on the top left. Then right click on the model and export. If you mess up the parameters, close and reopen the tab. If you have any questions about the parameters, ask in the comments.