Magnetic Toggleable Physical Todo_Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Physical Toggle switch for whatever tasks. V2 toggle now snaps over in a very satifying way :)
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 183
- Wydruki
- 2
- Wyświetlenia
- 1044
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Original by Apollo-Roboto
This is a remix with a different look, please visit the original for a different style.
If you find any problems with the design feel free to comment your concerns and i'll gladly update the model if necessary :)
Differences:
_Toggle round-ish (Original is rectengular)
_Color window on toggle is bigger and more visible at a glance.
added in v2:
_Magnets in toggle switch for very satisfying snap (not compatible with v1 base).
_Now pressfit body. (Glueing for magnets might still be necessary)
changed for v2_3x8
_Uses 3x8 magnets, since the 2x6 magnets are kinda weak
_Now even more satisfying, even if you use the strong magnet in the toggle with the weak magnets in the base.*
*Note for v2_3x8:
You can use the toggle of this version with the base of the normal version, however, if you also use the magnets to stick it to your frige (or whatever), using the toggle will move the whole thing.
Or use the reverse (3x8 magnets in the base and 2x6 in the toggle) to make it more fridge viable.
The Toggle is compatible with the normal v2 base, so a simple replacement if required. The new base however is a little thicker, so it does require the the equivalent top part aswell.
Instructions
(Also kinda by Apollo-Roboto, yes I am lazy)
Painting the switch
I painted mine with green and red acrylic paint.
You can also leave the bottom of the toggle tray blanc for more of a smartphone toggle feel.
Inserting the magnets
I used those magnets: 6x2mm magnets, should be the same used for Gridfinity.
If you want truely satisfying snaps i recomend using the v2_3x8 version toggle with the
You can place half a drop of crazy glue in the hole and slide the magnet in. I found it easier to handle with extra magnets on the other side so it stays in place while drying.
Assembly
Like the original, this is now also pressfit. Just press the big parts together , just don't forget to insert the toggle switch first :)
If you like it, please also visit the original to give Apollo-Roboto the credit they deserve.