1 / 4
Bicycle rack rear light mount for LocaTag with M3x8mm secured cap — zdjęcie 1
1 / 4

Bicycle rack rear light mount for LocaTag with M3x8mm secured cap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Enclosure for "LocaTag" 36 mm circular tracking devices, for bicycle rear lights with 50 mm bolt spacing

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
65
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is an enclosure for cheap tracking devices commonly sold as "LocaTag" with a 36 mm circular design. The enclosure mounts to rear lights on bicycle racks that have a 50 mm bolt spacing with 5 mm bolts. The cap is secured with a M3 x 8mm nut and bolt. The tag, bolt and nut fit is quite snug and might a require a little force on first assembly.

Make sure there's a bit of space behind your rear light mount, some bike racks like the Racktime LightIt have a curved mount that won't fit this (I figured this out too late… oops).

I test-printed both parts flat-side down with PLA without support, a bit rough in the screw cavities but otherwise fine.

Tagi