1 / 4
Bicycle rack rear light mount for LocaTag with M3x8mm secured cap — image 1
1 / 4

Bicycle rack rear light mount for LocaTag with M3x8mm secured cap

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Enclosure for "LocaTag" 36 mm circular tracking devices, for bicycle rear lights with 50 mm bolt spacing

Rating
0 / 5
Likes
1
Downloads
8
Makes
0
Views
64
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is an enclosure for cheap tracking devices commonly sold as "LocaTag" with a 36 mm circular design. The enclosure mounts to rear lights on bicycle racks that have a 50 mm bolt spacing with 5 mm bolts. The cap is secured with a M3 x 8mm nut and bolt. The tag, bolt and nut fit is quite snug and might a require a little force on first assembly.

Make sure there's a bit of space behind your rear light mount, some bike racks like the Racktime LightIt have a curved mount that won't fit this (I figured this out too late… oops).

I test-printed both parts flat-side down with PLA without support, a bit rough in the screw cavities but otherwise fine.

Tags