Mount "Plasticlamp" to ¼"-20 thread
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach "Plasticlamp" assemblies from either a hexagonal inset or protrusion to a ¼"-20 thread, such as a camera mount.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
@danec's "Plasticlamp" system is awesome. This part allows Plasticlamp stuff to mount to a camera mount, which has ¼"-20 thread. The main block has a recess for an M3 nut, a slot for a ¼"-20 nut, and a hexagonal inset for connecting to Plasticlamp. If, like me, you want to connect it to a Plasticlamp piece that also has a hexagonal inset, there's a 4mm hexagonal piece to join two inset pieces.
Should print fine without supports, oriented with the slot for the ¼"-20 nut facing up as in the file.
Insert the M3 nut through the hole opposite the hexagonal inset. Press it down as far as possible (it's a tight fit). Attach the adapter to your other Plasticlamp items using an M3 bolt. Insert the ¼"-20 nut into the slot and attach the adapter to the ¼"-20 mount.