1 / 1
Magnetic Hook 2x 10x2mm magnets with Anti-Slip feature
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix using 2x 10x2mm magnets and a strip of TPU filament as anti slip stopper.
- Ocena
- 3 / 5
- Polubienia
- 4
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 102
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This Remix uses 2x 10x2mm magnets and a roughly 9mm long piece of TPU filament as Anti-Slip feature.
Installation:
Cut a 9mm long piece of TPU (or similar filament types) from your filament spool and glue it into the slot of the hook.
Also glue the two magnets into place.