Miniature Crib for "Zuru My Mini Baby"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a crib intended for the "My Mini Baby" toys made by Zuru. You could also scale it for other toys/dolls.
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 207
- Wydruki
- 0
- Wyświetlenia
- 734
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
This is a crib which you can use for small dolls. You could also use it for larger ones if you wish to scale it up. It is approximately 10cm x 6cm.
It does have legs. When I printed it, I used sparse supports on the bottom and they peeled off nicely. If your printer is very good with bridging it would probably also print upside down pretty well. I also used a wood PLA, but there's no reason you couldn't use anything you want.
If you don't want strings in between the slats, make sure your retraction is tuned fairly well.
I am including an STL for printing as well as the OpenSCAD file. Have fun and I hope this brings someone joy.