Magnetic Pin Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sewing pin tray with embedded magnets (alternative to a pin cushion). Could also be used as a parts tray.
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 555
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
My husband asked me to design him a magnetic pin tray for sewing and this is what I came up with. It has two 60x10x3mm neodymium magnets embedded in it (I used these).
Both the 3mf and the gcode file contain a pause instruction for adding the magnets.
Be careful with the magnets - they're easy to break. Fortunately, if you break them you can still put the broken ones in the print (like I did in the pink one pictured).
I've used a variety of settings for these, including both 0.4 and 0.6mm nozzles. When using the 0.6mm nozzle, I used a variable layer height to provide more definition at the surface of the tray. Both the attached 3mf and gcode file use an 0.4mm nozzle and a consistent 0.15mm layer height.