Magnetic Pin Tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sewing pin tray with embedded magnets (alternative to a pin cushion). Could also be used as a parts tray.
- Rating
- 0 / 5
- Likes
- 40
- Downloads
- 67
- Makes
- 0
- Views
- 555
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
My husband asked me to design him a magnetic pin tray for sewing and this is what I came up with. It has two 60x10x3mm neodymium magnets embedded in it (I used these).
Both the 3mf and the gcode file contain a pause instruction for adding the magnets.
Be careful with the magnets - they're easy to break. Fortunately, if you break them you can still put the broken ones in the print (like I did in the pink one pictured).
I've used a variety of settings for these, including both 0.4 and 0.6mm nozzles. When using the 0.6mm nozzle, I used a variable layer height to provide more definition at the surface of the tray. Both the attached 3mf and gcode file use an 0.4mm nozzle and a consistent 0.15mm layer height.