Withings BPM Connect case with sliding lid

Case for the Withings BPM Connect blood pressure meter with sliding lid. 

The lid locks in place with a small lip. 

There is also a lid part without the logo added in case you want to use the box for other cases:

The inside is roughly 70x70x175mm (b*w*h) to be able to store the blood pressure meter fast without squeezing it tight into the case…

Printing instructions:

• 0.28 draft profile.
• Supports needed from the print bed for the logo in the lid part.
• No brim needed. Set active for the print test though…
• To get the texts in a different color add a color change to the lid part after 1 mm print height and after about 2.4mm again to the desired color. To read how such a color change is done, you will find a really good article here.
• Fuzzy skin paint on option used too to give it a little more texture to the print.
• Optional: Add extra texts like your name to the base part if you want to in Prusa Slicer.

NOTE: Used a license free logo for the lid part.

Happy printing =)