1 / 15
Withings BPM Connect case with sliding lid
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Withings BPM Connect case with sliding lid
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 45
- Makes
- 0
- Views
- 175
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
Case for the Withings BPM Connect blood pressure meter with sliding lid.
The lid locks in place with a small lip.
There is also a lid part without the logo added in case you want to use the box for other cases:
The inside is roughly 70x70x175mm (b*w*h) to be able to store the blood pressure meter fast without squeezing it tight into the case…
Printing instructions:
- 0.28 draft profile.
- Supports needed from the print bed for the logo in the lid part.
- No brim needed. Set active for the print test though…
- To get the texts in a different color add a color change to the lid part after 1 mm print height and after about 2.4mm again to the desired color. To read how such a color change is done, you will find a really good article here.
- Fuzzy skin paint on option used too to give it a little more texture to the print.
- Optional: Add extra texts like your name to the base part if you want to in Prusa Slicer.
NOTE: Used a license free logo for the lid part.
Happy printing =)