40 models
The charging stand is tested with the 42mm version, but it should work with the 38mm as well. It requires supports when printing. Leave a like if you like the charging stand! Print settings: supports required
Adapter to connect regular arm bands to Withings Pulse HR fitness trackers
Fits factory charger for Withings ScanWatch Nova, secured by friction. Scaled and slightly adapted for ScanWatch Nova.
I had the problem that my robot vacuum cleaner constantly wanted to climb on the scale. The wall mount solves the problem. I have glued a bit of felt (from felt furniture gliders) in the holder, so the scale slides out and in nicely.
A foot and a center cap for the original Withing Smart Scale The center cap is a capacitive button originally but if you don't care about waking the scale up to only see the weather, you don't need it for it to work.
Two part model, print the “ring” and “foot”. The ring which holds the charger itself snaps into place. Due to draft angles on the charger itself this can be tricky to put in, take your time to not break it. Once it is in it will hold very…
Tested with 38 and 42mm version requires support to print Leave a like, if you like it!
Stand for Withings Body Cardio Scale and BODY+ (upright position) For reasons I needed an upright stand for my Withings Body Cardio (and BODY+) in the bathroom. With this stand I safely can stow the scale in an upright position when not…
Replacement foot for the Withings Body scale
You can print it without support. 3 walls with 10% infill :)
Usually, I needed my Withings BPM connect or my Withings Thermo I was lying in bed and was too lazy to get up ;-) So, I designed this mount for a bed or wall (I simply used power strips to attach). Since there was still room in it, I also…
A simple remix of honei's BPM Connect and Thermo holder. I don't have a thermo, so I took the model, sliced it up in Tinker CAD to use the side that was sized for the BPM connect itself. I also added a small screw hole on the back for…
I printed this plan and realised it didn't fit my Withings scan watch, so I took the inspiration from the plan and designed my own stand. Made this plan , but it had some flaw so I create a new one which work perfectly! Its made of two…
Case for the Withings BPM Connect blood pressure meter with sliding lid. The lid locks in place with a small lip. There is also a lid part without the logo added in case you want to use the box for other cases: The inside is roughly…
A stand for withings steel hr smartwatch Print Settings Printer: Darky-pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 30 Filament: PLA PRO PLA gray Category: Accessories
Holder for my scale to hang under the washbasin commode. Print one of them mirrored.
The Withings Body Scan scale has a retractable handle that can be mounted using an included adhesive wall mount. However, the wall mount that comes with the unit uses a strong adhesive strip that will potentially pull paint off a wall and…
Chargeur pour scanwatch couplé avec un chargeur pour téléphone. J'ai aussi ajouté un modèle sans le chargeur pour téléphone
This is a mount for the Withings / Nokia Home camera because it doesn't really come with one. This has opening for all of the ports at the back of the camera and even openings on either side for the microphones on the camera. I have…
Fits factory charger for Steel HR. Meant to holds by friction, but at least on my own printers and slicers I have notices that the quality of the friction fit depends somewhat on the printing orientation.
sind it was missing i made an additional model
I printed this plan and realized it didn't fit my withings scan watch, so I took the inspiration from the plan and designed my own stand. If you print it, and it works for you, please rate it and post a make, that would be highly…
A really simple model - a set of simple framing corners for the Withings Body+ scale, to keep the scale in one place (my Roomba likes to push the scale around). I used 3M 111 primer to improve 3M VHB tape adhesion to my PETG filament…
Hang your Withings under a PC monitor and keep your desk clean! Fits to: Withings Steel HR 36mm Geniue USB Charger What you need: Printed STL parts Superglue Double-sided tape (10mm VHB tape is preferred) Steps: Print STL parts Fix two…
A replacement clip for the original Withings Pulse Wristband. Basically all you need is a Withings Pulse as well as a generic watch band. Print Settings Printer Brand: SeeMeCNC Printer: Rostock MAX Rafts: No Supports: Yes Infill: Yes…
Since the Body Scan 2 didn't come with a wall mount for the handle I decided to create one. I built it as two parts to make it easier to print without supports. I printed them on my Core One+ with the ".20mm Balanced @COREONE HF0.4" print…
The Watch Stand – Compatible with Withings ScanWatch Nova The Watch Stand is a 3-part 3D printable stand compatible with Withings ScanWatch Nova. The stand consists of a base plate with extra slots for rubber feet or pads, a support stem,…
LHW 1 · Rev. A – Wandhalterung für den Handgriff der Body-Scan-2-Waage Der Handgriff der Withings Body Scan 2 hängt nach dem Messen am Kabel herum oder liegt am Boden. Mit diesen beiden Halterungen hat er einen festen Platz an der Wand:…
English: Repair Kit for Withings Body+ Scale – Restore Body Composition Analysis This repair kit is for the Withings Body+ scale , for cases where the body analysis function (measurement of body fat, muscle mass, and water content) is no…
This is an Ikea Skadis stand designed for a Withings Scanwatch 2 and its charger. Usage is pretty simple- pop the charger into the bottom recess and hook onto your Skadis. Print settings are flexible but unfortunately you do need to…
Holder for my scale to hang under the washbasin commode. Print one of them mirrored.
Feet on scale tend to break off and disappear. Can't buy them from Withings. Printed in ASA.
My robot vacuum pushed my Withings scale against the wall and I feel like that could impact its measurements. This spacer fixes that. Not really groundbreaking complex, just a simple clip that goes onto the feed of the scale and spaces it…
Handle wall holder for Withings Body Scan to be screwed to your wall. I did not trust the glue tape variant that was included with the scale for the long term. So I made this one to be fixed with screws to your wall. Parts needed: 2x…
Withings watch charging station has a spot for the charging dock and a hollow core for storing the USB cable. The USB part can be pulled out of the station without releasing the whole cable, giving a more organized look while keeping…
This is an Ikea Skadis stand designed for a Withings Scanwatch 2 and its charger. Usage is pretty simple- pop the charger into the bottom recess and hook onto your Skadis. Print settings are flexible but unfortunately you do need to…
die empfindlichen Kanten der Glasplatte der Withings Body Smart Waage können auf harten Badfliesen schnell brechen. 4 der Teile ausdrucken. Waage umdrehen, die kleinen Bumper um das Füßchen legen und über den Rand drücken. Ich habe meine…
The feet on the Withings personal scale are weak. This design is better than the original.
Fits factory charger for Scanwatch 2, secured by friction. Includes a path for routing the charging cable several ways.
