Stand for Withings Body Cardio Scale and BODY+ (upright position)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€7.95 – €9.72 net (excluding VAT)
For file: Withings Body cardio Scale Stand_0.2mm_PETG_MK3SMMU2S_9h37m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €8.84 excluding VAT (range midpoint).
- Weight reported by the author
- 101 g
- Print time reported by the author
- 9.62 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I needed a stand for the Withings Body Cardio Scale.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 83
- Makes
- 1
- Views
- 635
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution
Stand for Withings Body Cardio Scale and BODY+ (upright position)
For reasons I needed an upright stand for my Withings Body Cardio (and BODY+) in the bathroom. With this stand I safely can stow the scale in an upright position when not needed. So it is out of the way. I can take it out of the stand with just one hand, when I have to face the moment of truth and have to step on the scale in the morning.
For better cleaning of the bathroom floor and in case of too much water on the floor I put some small self adhesive rubber feet under the stand (2x4). Furthermore I secured it with double sided tape to the wall.

You can use screws as well if you like that better.
There are other Files in the download Section for Withings Body+
Please show me your results and send me fotos of your makes. I like to see how you use this model. If you have ideas for improvement don’t hesitate to send them to me in the comments. I will try to incorporate your suggestions and will modify the model for special needs if you ask me to do so.
And of course a like ♥ or a rating ⭐ of the design are always welcome.
happy printing, clamikra